Structural prototypes to end-use parts.
Fused deposition modelling in PLA, PETG, ABS, ASA, and Nylon for concept models through to production components. Layer orientation is engineered for load paths — not just print speed.
- ·Functional brackets, housings, and enclosures in engineering plastics
- ·Jigs, fixtures, and tooling aids for production lines
- ·Form-fit-function prototypes before committing to injection mould tooling
- ·Low-volume production runs of 1–500 identical parts
What materials are available for FDM 3D printing?
We print FDM in PLA and PETG for standard work, and ABS, ASA, and Nylon (PA12) for engineering-grade parts requiring heat or UV resistance. All materials are sourced from certified suppliers and process-qualified on our machines.
FDM material properties →
25-micron layers. Surface that speaks.
Stereolithography in standard and engineering-grade resins for high-detail visual prototypes, master patterns, and medical applications. 25-micron layer resolution delivers smooth as-printed surfaces that require minimal post-processing.
- ·Visual prototypes and master patterns for vacuum casting
- ·Dental and medical device components in certified biocompatible resins
- ·Jewellery and fine-detail consumer product prototyping
- ·High-precision fit checks and mating interface validation
How accurate is SLA printing for precision parts?
Our SLA Standard process holds ±0.1mm tolerance. SLA Professional in castable or dental resin achieves ±0.05mm — suitable for medical devices and jewellery master patterns.
SLA printing deep-dive →
Fully dense metal. Complex geometries.
Direct Metal Laser Sintering for fully dense, end-use metal parts in aerospace and medical alloys. Internal cooling channels, lightweight lattice structures, and consolidated assemblies are native to the process — not workarounds.
- ·Aerospace structural brackets and ducting in Ti-6Al-4V and Inconel 718
- ·Medical implants and surgical tools in 316L and 17-4 PH stainless steel
- ·High-temperature tooling inserts in H13 Tool Steel with conformal cooling channels
- ·Lightweight topology-optimised components that eliminate fastener assemblies
What metal alloys can you print with DMLS?
Our DMLS system processes 316L stainless steel, 17-4 PH stainless steel, H13 tool steel, Ti-6Al-4V titanium, and Inconel 718. All materials are certified to aerospace and medical supply chain standards.
Metal alloy properties guide →
Bridge tooling at 60% of CNC cost.
Hybrid metal 3D-printed mould inserts for soft and bridge tooling. Validate injection-moulded geometries and produce first-run samples before committing to CNC production tooling. Quote-based; includes mould fabrication and first-run samples.
- ·Bridge tooling for 50–5,000 first-run injection-moulded parts
- ·Geometry validation before committing to full CNC production mould investment
- ·Conformal cooling channels in H13 inserts for faster cycle times
- ·Aluminium 7075 inserts for softer materials and short-run consumer products
What is the difference between your Injection Tooling service and a production mould?
Our Injection Tooling service produces hybrid metal inserts for bridge and soft tooling — ideal for validating geometry and producing 50–5,000 first-run samples before committing to a full production CNC mould. Cost is typically 60–70% lower than machined tooling.
Injection tooling guide →
Clean kerf. No secondary deburring.
CNC fibre laser cutting for sheet metal and flat acrylic components. Clean kerf edges and precise hole geometries on mild steel, stainless steel, aluminium, and acrylic — no secondary deburring required on most profiles. Quote-based on material, thickness, and cut length.
- ·Sheet metal structural components with precision-cut holes and slots
- ·Acrylic panels, displays, and enclosure windows with clean edge quality
- ·Aluminium brackets and mounting plates for electronics and industrial equipment
- ·High-volume blanks for downstream CNC bending operations
What sheet thicknesses can you laser cut?
We cut mild steel up to 16mm, stainless steel up to 12mm, aluminium up to 10mm, and acrylic up to 20mm. Edge quality is clean-kerf on most thicknesses — no secondary deburring required.
Sheet metal guides →
Single-source sheet metal.
Press-brake bending for sheet-metal components requiring precise bend angles and tight inside radii. Complementary to our laser cutting service — blank goes from laser to press brake without handling between suppliers. Quote-based on material, thickness, and bend sequence.
- ·Enclosures and chassis requiring multiple bend sequences and tight corner radii
- ·Mounting brackets paired with laser-cut blanks from the same order
- ·Structural channels and angle sections for machine frames and equipment
- ·Sheet metal housings for electronics requiring EMI shielding continuity
Can you handle CNC bending after laser cutting?
Yes. We offer CNC bending as a complement to laser cutting — single-source sheet metal means your blank goes from laser to press brake without handling between suppliers. Quote covers both operations.
Sheet metal manufacturing →
Built for sectors
that demand precision.
From ISRO suppliers to jewellery ateliers — every part leaves our floor meeting the tolerance the application demands.
Scale models, spatial studies and facade mockups — from concept massing to client-presentation detail. Every layer at the resolution the architect demands.
Architecture
1:50 resolution
Jigs, fixtures, brackets and production-ready parts for OEM and Tier-1 supplier programmes.
Automotive
OEM · Tier-1
High-strength titanium and Inconel structural components for defence-grade thermal and mechanical applications.
Defence
AS9100 workflow
Biocompatible SLA and DMLS parts for medical devices, surgical guides, orthotics and dental prosthetics.
Healthcare
ISO 13485
Rapid iteration at every design stage — from concept foam-fit models to pre-production tooling validation. Multi-process runs, single point of contact.
Industrial Prototyping
48h turnaround
Castable wax and engineering SLA master patterns at 25 μm resolution — investment casting ready, surface quality straight from the vat.
Jewelry & Luxury
25 μm resolution120+ materials.
One spec sheet away.
Plastics, composites, resins, metals — sampled, certified and shelf-stocked.