Skip to content
Layer X
Get a quoteWhatsApp
3D PrintingPublished 8 Nov 2026 · Updated 3 Nov 2026

Display Model 3D Printing: FDM or Resin for Stall Lights

Display model 3D printing for exhibitions: compare FDM filament and SLA resin for surface finish, layer lines under stall lights, size limits and cost.

Layer X Team
Layer X Editorial Team
7 min read
Share

Say a pump maker from Rajkot is taking a stall at a trade fair in Gandhinagar and wants a model of its new assembly on the front table. The drawings are ready, the date is fixed, and the question is how to make it. For display model 3D printing, the real choice is between FDM filament (PLA or PETG) and SLA resin, and the stall lights change which one looks better. Spotlights skim across the surface and show every ridge, while visitors crowd close enough to touch. This guide is for Gujarat factory owners and marketing managers planning exhibition pieces. We compare surface finish, layer lines at real viewing distance, size limits, cost and lead time, then show how a hybrid build uses both processes, and how acrylic covers change what visitors notice. For machine, plant and product models, see our industrial and exhibition models.

What visitors actually see under stall lights

Exhibition lighting is usually bright and directional. Light that skims across a surface from the side, called raking light, exaggerates any ridge, so layer lines that disappear in a showroom can look like a ribbed texture under a stall spotlight. Light from the front and above hides them. You rarely control the stall lighting, so design the model for the worst case.

Viewing distance matters just as much. Visitors typically look from arm's length, then lean in to read a detail. A model has to hold up at both distances: clean form from a metre, believable detail up close. Large flat sides, long curves and glossy highlights show finish first, so spend effort there rather than on tiny bolts.

FDM or resin: the comparison that matters

The figures below are starting points. Every model is quoted per job after engineer review.

FactorFDM (PLA or PETG)SLA resin
SurfaceLayer lines visible unless finishedLittle visible layering; surface quality generally superior
Largest single part300×300×400mm192×120×245mm
Tolerance±0.3mm±0.05mm
Lead time3–5 days2–4 days
Starting pricefrom ₹400 per partfrom ₹800 per part
Best forLarge bodies, bases, housingsSmall parts and crisp detail

In short, FDM 3D printing suits the big, simple volumes and SLA resin printing suits the parts a visitor will study closely.

Layer lines at viewing distance

Layer lines come from how each process builds a part. FDM lays down a thread of melted plastic, and the nozzle is usually between 0.3 mm and 1.0 mm wide, which limits how fine an edge or a corner can be. SLA cures liquid resin with light and leaves much less visible layering. What does that mean for a stall table?

  • Big bodies seen from a metre: FDM reads as clean, especially in a matte colour, and costs less.
  • Large flat panels: the first place ridges show under raking light. Ask us about finishing for these surfaces.
  • Small hero details: logos, lettering, vents, control panels and railings look crisper in resin.
  • Smooth curves and organic shapes: resin, or FDM with finishing, depending on how close visitors get.

Finishing options depend on process and material, so mention which surfaces face the visitor when you request a quote.

Size limits and splitting a model

One FDM part can be up to 300×300×400mm, and one SLA part up to 192×120×245mm. Anything larger is printed in sections and joined. A conveyor model 800 mm long cannot be a single FDM piece, so it is split at a natural panel line where the seam hides. Plan the split with us before printing. It also makes the model easier to carry, which matters for transport to the venue.

Seams are the other thing visitors notice. A well-placed seam follows a panel line, a step or a colour change. A seam across a smooth curve, lit from the side, looks like a crack. Tell us which surface is the hero of the model and we will keep joins off it. Sections also let you replace one damaged piece after the show instead of reprinting the whole model.

Hybrid models: SLA detail on an FDM body

Most exhibition pieces work best as a hybrid. The body is FDM, the hero details are resin, and the visitor sees one crisp object.

  1. Split by attention. List what visitors will inspect: nameplate, control panel, impeller, nozzle. Everything else is body.
  2. Print the body in FDM. PLA or PETG, in the colour you want to keep.
  3. Print hero details in SLA. Small parts print fast and sharp.
  4. Design the joints. Resin is held to ±0.05mm and FDM to ±0.3mm, so leave clearance in sockets and glue the details in.
  5. Finish as one object. Ask about finishing options so colour and sheen can be matched across both processes.

Hybrid does not add weeks. SLA takes 2–4 days and FDM 3–5 days, and the two run in parallel. Design review, finishing and the acrylic cover usually set the schedule, because laser-cut acrylic runs 7–14 days. Work backwards from the first day of the show.

Acrylic covers, lighting and glare

An acrylic cover protects the model from dust and fingers, but it changes what visitors notice. Acrylic transmits up to 92% of visible light at 3 mm thickness, and each surface reflects about 4%, so overhead lamps appear as bright reflections on the cover. Place the model so the main viewing angle avoids a direct mirror image of a stall spotlight, and keep the surface matte.

Acrylic also scratches more easily than glass, and solvent-based cleaners can craze it, so clean with soap and water. If you want internal lighting, tell us at the start so hollow cores and cable routes can be planned. We do not supply or fit the lighting. Our scale model service covers bases and covers designed to suit the model.

Rule of thumb: judge a display model at the viewing distance and under the stall lamp, not on a desk, because raking light and glare are what visitors actually see.

Key Takeaways

  • Lighting decides finish: raking stall light exaggerates layer lines, so check large flat surfaces first.
  • FDM for bodies, SLA for detail: up to 300×300×400mm per FDM part and 192×120×245mm per SLA part.
  • Hybrid is the default: print a body in FDM and hero details in resin, with clearance in the joints.
  • Plan the cover early: laser-cut acrylic takes 7–14 days and adds glare you must position around.
  • Quote per job: starting prices are from ₹400 per part for FDM and from ₹800 per part for SLA.

Frequently Asked Questions

Does resin always look better than filament for exhibition models?

Resin has a smoother surface with little visible layering, so it wins on small detail. For large bodies viewed from a metre, a finished FDM part in a matte colour can look close and costs less. We usually recommend a hybrid.

How big can a display model be?

A single FDM part can be up to 300×300×400mm and a single SLA part up to 192×120×245mm. Larger models are printed in sections and joined, with seams hidden at panel lines. There is no minimum order.

How long does a display model take?

Printing takes 3–5 days for FDM and 2–4 days for SLA, and 7–14 days if you want a laser-cut acrylic base or cover, which runs alongside printing. Add time for file preparation and finishing. Send the show date and we will plan backwards from it.

Why Layer X for display model 3D printing?

Our Satellite studio in Ahmedabad prints FDM and SLA resin and cuts acrylic bases and covers, so a hybrid exhibition model comes from one team working to one set of drawings. Engineers review every file, flag details too thin to survive printing and suggest where to split the model. There is no minimum order, so one hero piece is as welcome as a full set, and we ship across Gujarat and India. Send your drawings, show date and stall layout, and Get your 24-hour quote.

Sources & Further Reading

  1. Wikipedia – Stereolithography
  2. Wikipedia – Fused filament fabrication
  3. Wikipedia – Poly(methyl methacrylate) (acrylic)
Layer X TeamLayer X Editorial Team

Technical content produced by the Layer X manufacturing team — engineers, quality specialists, and process experts with direct, hands-on experience.

Layer X services in this article
SLA Resin 3D PrintingFDM 3D Printing
Start a project

Need a quote for your next project?

Upload your CAD file and get a precision manufacturing quote within 24 hours.

Get a Quote
More from 3D Printing

Continue reading

3D Printing

Custom CCTV Camera Mount and Smart-Home Brackets: Printed Fixes

Need a custom CCTV camera mount for a curved pillar, odd pole or chhajja? Materials for sun and monsoon, design steps and when to choose sheet metal.

Read article
3D Printing

SAE BAJA 3D Printed Parts: What Helps and What Never to Print

SAE BAJA 3D printed parts for Indian college teams: ducts, sensor brackets, wheel prototypes and weld jigs, plus rulebook limits and design-report tips.

Read article
3D Printing

Large Format FDM 3D Printing India: Big Parts & Tooling

Explore large format FDM 3D printing India for jigs, fixtures, patterns and structural parts. Layer X delivers ±0.3mm tolerance, 300×300×400mm build volume from ₹400.

Read article